Change a Camera's Orientation

Rotate a camera’s view for optimal positioning

Sometimes, cameras can achieve a better field of view when installed in a non-standard orientation. For example, mounting a camera at a 90° angle can provide full coverage of a long hallway or stairwell. You need to change the camera’s orientation in Command if it is installed in a non-standard orientation.

Install cameras with the status LED pointing toward the floor for the live feed to appear as expected in normal orientation.

---

Configuration

1

In Verkada Command, go to All Products > Cameras .

2

Select the camera you want to configure.

3

At the bottom right, click Settings .

4

Under Device > Orientation, click Change.

a. Select an orientation mode. b. Click Save to confirm changes.

Fisheyes supports 3 additional view modes: Panoramic, Four-Way Split, and Pan-Tilt-Zoom. See Change Fisheye View Modes for more information.

Need more help? Contact Verkada Support.