Add a Door to an Access Controller

Adding a door to your Verkada access control system

A door consists of all the configurations and components connected to an access controller on a particular cassette.

You must be an Access Site Admin to add a door. Learn more about Roles and Permissions for Access Control.

1

On the AC41, there are four cassettes, labeled 1 to 4, that correlate to each door.

2

Configure a door: Find the number of the door wired to the associated cassette.

3

In Verkada Command, go to All Products > Devices.

4

Find the Verkada Access Controller you want to add doors to.

5

At the right, select the access controller.

6

At the top right, click Add.

7

From the setup list, click Door.

8

Follow the configuration steps to add a name and the components that are installed.

Only check the REX (Request to Exit) or DPI (Door Position Indicator) box if they are installed and you want the REX sensor/button to unlock the door (this is typically the case with magnetic locks).

---

Prefer to see it in action? Check out the video tutorial.

Need more help? Contact Verkada Support.