Skip to main content
Change a Camera's Orientation

Rotate a camera's view for optimal positioning

Updated over a week ago

Sometimes, cameras can achieve a better field of view when installed in a non-standard orientation. For example, mounting a camera at a 90° angle can provide full coverage of a long hallway or stairwell. You need to change the camera's orientation in Command if it is installed in a non-standard orientation.

Install cameras with the status LED pointing toward the floor for the live feed to appear as expected in normal orientation.


Select an orientation

  1. In Verkada Command, go to All Products > Cameras .

  2. Select the camera you want to configure.

  3. At the bottom right, click Settings .

  4. Under Device > Orientation, click Change.

    1. Select an orientation mode.

    2. Click Save to confirm changes.

Fisheyes supports 3 additional view modes: Panoramic, Four-Way Split, and Pan-Tilt-Zoom. See Change Fisheye View Modes for more information.


Need more help? Contact Verkada Support.

Did this answer your question?