Change a non-Verkada Channel Orientation

Rotate a non-Verkada channel camera view

Sometimes, non-Verkada camera feeds may appear with an incorrect orientation. The Command Connector provides an easy way to rotate these feeds directly in Command, ensuring proper alignment for better visibility.

---

Configuration

1

In Verkada Command, go to All Products > Cameras .

2

Select the non-Verkada channel you want to configure.

3

At the bottom right, click Settings .

4

Under Device > Orientation, click Change.

a. Select an orientation mode. b. Click Save to confirm changes.

A Command Connector can rotate up to four non-Verkada camera feeds. Only H.264 main and high profiles support camera rotation.