Contact Support

Occupancy Trends

Enable occupancy trends to track people and vehicles around your organization

Occupancy trends provide organizations with an estimate of the foot traffic at critical locations within their facilities. These estimates can provide valuable insights for optimizing staffing, adjusting hours of operation, and or tracking the

performance of marketing and promotional activities.

This feature is only available on the CD63, CD53, CD43, CD62, CD52, CD42, CD32, *CB62, *CB52, CH52-E, CY53-E, CM42-S, and CM42 models.

* LPR mode must be disabled on bullet cameras to enable occupancy trends.

Installation guidelines

For best performance, we recommend these installation guidelines during the installation of a camera where Occupancy Trends will be enabled:

  • Choose a one-directional path. Occupancy Trends works best in locations such as doors and hallways.

  • Install the camera 8–12 ft (2.4–3.7m) away from the digital line.

  • Position cameras no more than 40–60˚ vertically from the location of the digital line.

  • Minimize occlusions and constructions between the camera and the line.

  • Ensure good illumination and visibility on both sides of the line. Individuals must be visible on both sides of the line for at least one second.

Enable occupancy trends

1

In Verkada Command, go to All Products > Cameras.

2

Select a camera.

3

Under the camera’s live feed, select Analytics .

4

Select Occupancy Trends > Add lines.

5

Click and drag on the camera view to draw a line across the screen.

Note: You can draw multiple lines, but data from all lines are aggregated.

6

(Optional) Click Add Custom Line to add additional presets.

Note: The data from these presets will be separate from each other.

7

Click Save.

View occupancy trends

1

In Verkada Command, go to All Products > Cameras.

2

Select a camera.

3

Under the camera’s live feed, select Analytics > Occupancy Trends.

4

(Optional) On the left of the camera feed, select your custom line preset.

5

This tab presents all the estimated In and Out counts for your selected period of time. You can hover your mouse over individual bars to see the numeric count for that period.

6

Select the date range to select a date range or to set a custom range.

7

Select the period of time dropdown to choose the period of time that each column in the graph represents.

Export occupancy trends

You can export occupancy trends results as a .csv file.

1

In Verkada Command, go to All Products > Cameras.

2

Select a camera.

3

Under the camera’s live feed, select Analytics .

4

At the top right, click Download .

Prefer to see it in action? Check out the video tutorial.

Need more help? Contact Verkada Support.

Last updated

Was this helpful?