In Verkada Command > Devices, at a glance, you can view of all of your access controllers in your organization (org), including the status and serial number. Access controllers are grouped by site.
Note: You must be an Access Admin and a Site Access Admin of, at least, one site with an access controller in it to view the access controllers option on the Devices page.
View list of access controllers
In Verkada Command, go to All Products > Devices.
In the search bar, filter for device type: Access Controller.
This page shows all access controllers for which you have Site Access Admin permissions.
Select an access controller to view its configuration such as its serial number, IP address, AUX port configuration, and door port configuration.
(Optional) Select the Site dropdown to change the access controller's site.
Note: You must be a Site Access Admin for both the site in which the access controller currently resides, and for the site to which you would like to move the access controller.
View and modify access controller
Select the image of the access controller to enter its configuration page. From here, you can view and modify the access controller's door ports and auxiliary devices.
Click Settings to view and modify the access controller settings.
You can set the access controller's Name, Location, and Timezone. The status, serial number, and firmware of all connected Verkada card readers are listed at the bottom of the page.
(Optional) Click these buttons to perform quick actions on the access controller:
Identify—Blinks the status LED of the access controller pink for easy visual identification.
Restart—Issues a software reboot command to the access controller.
Decommission—Removes the access controller from your Command organization.