Create Site Plan Project

Learn how to Create Projects in Site Planner

In Verkada Command, go to All Products > Site Planner.

In the top right, click New Project.

On Create a project:

a. Enter the project name (e.g. customer name) b. (Optional) Upload a logo or image that represents the Project c. Click Create.

On Create a Location:

a. Enter the project location. b. Enter the street address. c. Click Create. d. Click Create a Plan.

On Create a plan:

a. Enter a plan name. b. (Optional) Upload an image of your site plan. c. (Optional) Set the scale of your site plan. d. (Optional) Align your plan on the map. e. Click Create.

Site plans support PDF, PNG, and JPG files with a maximum size of 15MB.
Site planner does not support multi-page PDFs. Split PDFs into single-page files before uploading.

Do not upload a site plan if you want to plot Verkada products directly on the map. The map will load at the specified location to allow you to plot products.

Crop a site plan

After you upload a site plan, you can crop the file to only display the relevant portion in the plan editor.

Click and drag one of the four corners to change the shape of the site plan.

Click and drag one of the four sides to change the dimensions of the site plan.

Click Done to save the changes.

Set the site plan scale

Set the scale of your site plan to ensure accurate Verkada device ranges on the map.

Select two points on the site plan.

Enter the distance between the two points. Both feet and meters are supported.

Click to save.

In the U.S., the standard door width is 3 feet. Use this as the scale by selecting two points on a door on your site plan.

Align a site plan

Set the orientation of your site plan to accurately align with the map.

Click and drag one of the four corners to change the size of the site plan.

Click and drag the handle at the top center of the image to change the orientation.

Need more help? Contact Verkada Support.

Last updated 5 days ago

Was this helpful?