Deleting Air Quality Sensors
Steps to delete and remove air quality sensors from an Organization
Updated over a week ago

To delete and remove sensors from your organization, you must be an Org Admin with Site Admin permissions on the site that contains the sensor(s).

Deleting an air quality sensor from Command will erase all of its data and reset it to factory default settings. This is a good way to reset the sensor and start over, move it to a different organization, or remove it if it is no longer needed.

Deleting a Sensor from Command.

  1. Select the Air Quality home from the All Products menu

  2. Select the desired sensor

  3. Click the gear icon in the upper right corner

  4. Navigate to the Device sub-menu

  5. Select Delete

  6. Complete the validation prompt

Deleting a Sensor from the Mobile App

  1. Click your sensor in the list

  2. Click Settings

  3. Click the Delete Sensor button

  4. Follow the prompts

Bulk Delete Sensors from Command

  1. Navigate to the Devices page in Command and filter for device type: Air Quality

  2. Select the sensors you would like to delete by selecting the check box to the left of the device

    You can also select all devices within the site, or all devices in the org by clicking the black box with the white vertical line through it

  3. Select the Delete button in the top right-hand corner of the screen

    Note: This may appear as just a trash can if you are viewing from a mobile browser or a low-resolution monitor.


Did this answer your question?