All Collections
Air Quality Sensors
Configuration and Setup
Integrating Verkada Cameras With Your Air Quality Sensors
Integrating Verkada Cameras With Your Air Quality Sensors

You can easily add a feed from your Verkada camera to a nearby sensor to be able to get quick insights into the area

Updated over a week ago

Adding a Camera feed to your Air Quality Sensor

You may want to add a camera feed so that you can see what's going on near the sensor at a quick glance. To associate one of your Verkada cameras to a sensor, follow these steps.

  1. Select the + Camera icon in the upper right-hand corner of the sensor page

  2. Choose which camera you'd like to add to this sensor

  3. Select Confirm to add the camera

  4. You'll see the camera feed show up next to the sensor info

Changing or Removing a Camera feed from an Air Quality Sensor

To remove a camera feed from a given sensor, navigate to the sensor details page, and follow these steps.

  1. In the upper-right corner of the camera's feed select the pencil icon that shows Edit Camera

  2. This will open the Select Camera menu where you can change which camera is selected

  3. If you'd like to remove the feed completely, just select it to remove the checkmark

  4. Select Confirm to finalize the settings

Did this answer your question?