Verkada door controllers bring plug-and-play simplicity to enterprise-grade access control. The Verkada AC41 Door Controller supports existing door hardware and card readers while enabling cloud-based access to a limitless number of doors and events across your organization.
Verkada offers the ACC-BAT-4AH for use with the AC41, where it can be powered by a 12V 4.5Ah, sealed lead-acid (SLA) battery as a backup power source.
Install a backup battery to your AC41
In case of a power outage, or situations where your Verkada Access Controller is powering locks, or being used in critical safety applications, we strongly recommend that you to consider a battery backup plan.
Connect the red lead with the positive (+) connector on the battery and the black one to the negative (-). The battery pack can then sit inside the Verkada AC41 case.
Example: Ready-to-connect red and black leads
Example: Completed installation
Wire backup batteries to the AC41
To get double the amp hours (capacity), while maintaining the same voltage, you can connect 2 batteries in parallel (not in series) to provide twice as much battery capacity.
Example: Connecting 2 batteries in parallel
Need more help? Contact Verkada Support.