Wi‑Fiブリッジを使ってVerkadaカメラを接続する

Wi‑FiブリッジでVerkadaカメラを接続する方法を学ぶ

When a Verkada camera is installed remotely, a mobile router can be used to connect it. When a camera is mounted within the line-of-sight of an existing network, a point-to-point connection can bridge the gap. But what about when the camera is installed beyond the reach of an Ethernet cable and hidden from the view of a point-to-point link? You can use a Wi-Fi bridge to connect your Verkada camera to an existing Wi-Fi network.

Required equipment

• Existing Wi-Fi network

• イーサネットケーブル

• Wi-Fi bridge (with wireless client mode)

• 802.3af/at PoE source (usually a switch or PoE injector)

Installation

1

Configure your Wi-Fi bridge to connect to your access point as described in its documentation.

2

Proceed like with any Verkada camera. You will use the bridge as your network link.

私たちは 強く推奨します that you test your Verkada Camera in its desired location. Depending on the environment and signal strength, your experience can vary.