Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Alert Inbox User Guide

This guide outlines key steps and best practices for configuring and managing alerts in Verkada Command. Following these guidelines helps your security operations team work efficiently, maintain a clear audit trail, and respond to incidents quickly and accurately


Roles and permissions

Access to the Alert inbox depends on who is a recipient on the alert.

Organization Admins

  • Have full, unrestricted access by default

  • Can assign, manage, add notes, release, reopen, and close any alert, including alerts assigned to other people

Recipients

  • See alerts where they, or a group they belong to, are recipients

  • Can assign, investigate, and close alerts they can access

  • Receive push, SMS, email, or messaging-platform notifications based on the notification method(s) configured.


Open the Alert inbox

1

On the Command homepage left navigation, click Alerts.

2

In the top left, click the Alerts dropdown.

The menu has four options:

  • Events — device events

  • Alerts — alerts you receive, with status and assignment

    • Alarms appear in Active Emergencies. Select Investigate to open the alarm detail page and review all related information. From there, you can dispatch emergency services or resolve the alarm based on the severity of the incident.

  • Active Emergencies — alarms, lockdowns, scenarios, and similar events

  • Helix — Helix and custom events

The Command mobile app includes the full inbox: Events, Alerts, Active Emergencies, Helix, and Manage Alerts.


Add recipients to existing alerts

Organization Admins can add recipients so alerts appear in their Alert inbox when triggered.

See Create Alerts Across Verkada Products to create a new alert.

1

On the Command homepage left navigation, click Alerts.

2

Select the alert you want to edit.

3

Click Edit Alert.

4

Under Recipients, add the users or groups who should see the alert.

5

Under Instructions, add alert-specific instructions for responders, then click Done.

When you configure an alert, add custom instructions to guide responders through the response and investigation. Clear, actionable instructions keep incident handling consistent.

  • Be specific and action-oriented. Use precise verbs, such as Verify, Contact, Dispatch, and Document.

  • Define escalation paths. Identify who to contact if escalation is needed.

  • Keep it concise. Use short, direct steps and simple language.

  • Include links or numbers. Add relevant hyperlinks or phone numbers for quick action.


Manage alerts

Alert statuses move from Open to In Progress to Closed.

When an alert triggers, it appears in the Alert inbox as Open. Assigned alerts are In Progress. These statuses are shared with every recipient on the alert.

Change assignment

1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

On the left, select the alert you want to assign.

4

Click Assign to assign the alert to yourself or another recipient.

The Activity Log updates with Assigned to [Name] to record the action.

Release puts an in-progress alert back in the queue.

1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

On the left, select the alert you want to release.

4

Click Release.

Released alerts return to Open with no assignee. Choosing No Assignee also sends an alert back to Open.

Change alert status

The alert read and unread status is personal. A user's actions do not affect the alert status for other team members.

Opening an alert marks it as read for you.


1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

On the left, hover over and select the next to the alert(s) you want to update.

4

From the Actions dropdown, select one of the following options:

  • Mark as Read

  • Mark as Unread

Close an alert after you have fully handled and documented the incident. Closing removes it from the active queue and marks it resolved.


1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

On the left, hover over and select the next to the alert(s) you want to update.

4

From the Actions dropdown, select Close Alert.

5

Click Close Alert again to confirm.

Large batches close in the background and can take several minutes. The inbox updates when the close finishes.

1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

Select the closed alert.

  1. In the bottom center, click > Reopen.

  2. Click Reopen again to confirm.

Reopened alerts are In Progress and assigned to the person who reopened them.

1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

On the left, select an alert.

4

At the bottom, click Add to Incident.

See Incident Management for more information.


Investigate an alert

  • Read the instructions. These are the alert's standard operating procedure (SOP).

  • Analyze the video. Watch the full event clip. In the bottom right, select a clip to open the full-screen history player.

  • Review video feeds. Toggle between Event Clip and Live to see current activity.

  • Use multiple views. For complex alerts, such as License Plate Recognition (LPR), switch between camera views, map view, and close-ups to gather context.

The Activity Log is the official, time-stamped record of the incident. A detailed log is critical for audits, post-incident reviews, and team collaboration.

The log shows whether each notification was delivered and which channel delivered it.

Add notes or photos as you work to document actions and communications. Use the text box to leave notes for other operators or managers.

Notes can be edited and deleted. Edits and deletions show in the log.

Examples:

  • "Verified LPR match. Dispatched local police."

  • "Contacted Michael Scott via radio. En route to investigate."

Tags make it easy to categorize, search, and analyze alerts.

Apply relevant tags, such as Dispatch, False Alarm, Guard Notified, Maintenance Required, or LPR-BOLO.

At the top, click Tag and search for or create a tag.

Use a consistent tagging system across your organization to keep reporting uniform.

Filter alerts by site, event type, product, status (Open, In Progress, or Closed), tag, or assignee. Filters help you manage workload and focus on active alerts.

In the top center, click to open filters.


Export alerts as CSV

Organization Admins can export alerts as a comma-separated value (CSV) file.

1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

In the top right, click .

  1. Select the date and time range.

  2. Click Start Export.

Command emails the file when the export is ready.


Share an alert

You can send a secure link to an alert to internal colleagues or external partners, including law enforcement or on-site guards. Shared alerts support real-time note updates and media uploads, so field personnel and the security team can coordinate.

1

On the Command homepage left navigation, click Alerts.

2

From the Alerts dropdown, select Alerts.

3

In the bottom center, click > Share.

  1. Enter a phone number or email address, or select an existing contact from Command.

Use external contacts to share alerts with people who are not Command users. See Contacts for more information.

  1. Choose the access duration in hours or days.

  1. (Optional) Add instructions to include with the shared alert.

  2. Click Share.

Last updated

Was this helpful?