> For the complete documentation index, see [llms.txt](https://help.verkada.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.verkada.com/sound-systems/ko/configuration/add-network-speaker-to-command.md).

# Network Speaker를 Command에 추가

Command 계정에 네트워크 스피커를 추가하는 방법을 알아보세요

Verkada 네트워크 스피커를 사용하면 전용 하드웨어 프로세서, 랙 또는 앰프 없이도 시설 전체에 음악과 안내 방송을 원활하게 전송할 수 있습니다.

{% hint style="danger" %}
Command에 네트워크 스피커를 추가하려면 오디오 사이트 관리자 권한이 필요합니다.
{% endhint %}

***

### 네트워크 스피커 등록

{% stepper %}
{% step %}
**Verkada Command에서 All Products > Devices로 이동합니다.**
{% endstep %}

{% step %}
**오른쪽 상단에서 Add Devices를 클릭합니다.**
{% endstep %}

{% step %}
**기기의 일련번호 또는 주문 번호를 입력합니다.**
{% endstep %}

{% step %}
**Add를 선택합니다.**
{% endstep %}

{% step %}
**메시지가 표시되면 네트워크 스피커를 할당할 사이트와 공간을 선택한 다음 Apply를 클릭합니다.**
{% endstep %}

{% step %}
**기기가 Command에 연결되고 필요한 경우 펌웨어를 업데이트할 때까지 잠시 기다립니다. 완료되면 Next를 선택합니다.**
{% endstep %}

{% step %}
**(선택 사항) 샘플 트랙과 볼륨 슬라이더를 사용해 새 네트워크 스피커를 테스트합니다.**

{% hint style="info" %}
테스트 옵션을 보려면 새로 만든 공간을 클릭해야 할 수도 있습니다.
{% endhint %}
{% endstep %}

{% step %}
**완료되면 Done을 클릭합니다.**
{% endstep %}
{% endstepper %}

***

### NS151 스피커 추가 및 Wi-Fi 연결 설정

{% hint style="warning" %}
NS151은 Wi-Fi 연결을 지원합니다. Wi-Fi를 사용하지 않을 경우 위의 단계를 따르세요.
{% endhint %}

{% hint style="danger" %}

* Wi-Fi 연결은 Command 모바일 앱에서만 설정할 수 있습니다.
* 모바일 기기의 Verkada Command 앱에 Bluetooth 권한을 허용해야 합니다.
  {% endhint %}

{% stepper %}
{% step %}
**Verkada Command 모바일 앱을 실행합니다.**
{% endstep %}

{% step %}
**왼쪽 상단에서** <img src="https://1394446411-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F625ekX8IJU9vLoAm8JqU%2Fuploads%2FdAVnlg6U2xWa8ZfWQwSO%2FScreenshot%202026-09-02%20at%2010.11.58%E2%80%AFAM.png?alt=media&amp;token=d3a2ecf5-05ab-4609-a70c-bd872529d670" alt="" data-size="line">.
{% endstep %}

{% step %}
**하단에서 Add Device를 탭합니다.**
{% endstep %}

{% step %}
**기기의 코드를 스캔하거나 일련번호를 직접 입력합니다.**
{% endstep %}

{% step %}
**메시지가 표시되면 Wi-Fi 설정 옵션을 탭합니다.**
{% endstep %}

{% step %}
**페어링하는 동안 모바일 기기를 스피커 가까이에 둡니다.**
{% endstep %}

{% step %}
**메시지가 표시되면 원하는 Wi-Fi 네트워크를 선택하고 로그인 정보를 입력합니다. 모바일 기기를 스피커에서 멀리 옮기지 마세요.**
{% endstep %}

{% step %}
**기기가 Command에 연결되고 필요한 경우 펌웨어를 업데이트할 때까지 잠시 기다립니다.**
{% endstep %}

{% step %}
**설정이 완료되면 Done을 탭합니다.**
{% endstep %}
{% endstepper %}

***

### NS151 Wi-Fi 연결 재구성

{% stepper %}
{% step %}
**Verkada Command 모바일 앱을 실행합니다.**
{% endstep %}

{% step %}
**왼쪽 상단에서** <img src="https://1394446411-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F625ekX8IJU9vLoAm8JqU%2Fuploads%2FdAVnlg6U2xWa8ZfWQwSO%2FScreenshot%202026-09-02%20at%2010.11.58%E2%80%AFAM.png?alt=media&amp;token=d3a2ecf5-05ab-4609-a70c-bd872529d670" alt="" data-size="line">.
{% endstep %}

{% step %}
**사이드바에서 Speakers**<img src="https://1394446411-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F625ekX8IJU9vLoAm8JqU%2Fuploads%2Fa1V6P5noCwRCTNbZoE59%2Fpava-product-logo.svg?alt=media&amp;token=8aa79d4d-41c1-4456-81d8-89b30d3de9ca" alt="" data-size="line">**아이콘을 탭합니다.**
{% endstep %}

{% step %}
**기기가 포함된 스피커 사이트를 탭한 다음 Devices를 탭합니다.**
{% endstep %}

{% step %}
**재구성할 해당 사이트의 NS151 스피커를 탭한 다음 Set up Wi-Fi를 탭합니다.**
{% endstep %}

{% step %}
**페어링하는 동안 모바일 기기를 스피커 가까이에 둡니다.**
{% endstep %}

{% step %}
**메시지가 표시되면 원하는 Wi-Fi 네트워크를 선택하고 로그인 정보를 입력합니다. 모바일 기기를 스피커에서 멀리 옮기지 마세요.**
{% endstep %}

{% step %}
**기기가 Command에 연결되고 필요한 경우 펌웨어를 업데이트할 때까지 잠시 기다립니다.**
{% endstep %}

{% step %}
**설정이 완료되면 Done을 탭합니다.**
{% endstep %}
{% endstepper %}

***

### 네트워크 스피커 삭제

{% stepper %}
{% step %}
**Verkada Command에서 All Products > Speakers로 이동합니다.**
{% endstep %}

{% step %}
**왼쪽 탐색 메뉴에서 Sites를 선택합니다.**

1. 사이트를 선택합니다.
2. 오른쪽에서 **Go to Site를 클릭합니다.**
   {% endstep %}

{% step %}
**상단에서 Devices를 선택합니다.**
{% endstep %}

{% step %}
**기기를 선택한 다음 오른쪽에서** <i class="fa-arrow-right">:arrow-right:</i>.
{% endstep %}

{% step %}
**오른쪽 상단에서** <i class="fa-gear-complex">:gear-complex:</i>.

1. 아래에서 **Device > Delete를 선택하고** 를 선택합니다. **Delete를 선택합니다.**
2. 화면에 표시된 코드를 입력한 다음 **Delete** 를 다시 선택합니다.**.**
   {% endstep %}
   {% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.verkada.com/sound-systems/ko/configuration/add-network-speaker-to-command.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
