Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Sound Systems Spaces

Learn how spaces are used to group audio outputs into a single addressable unit

A space is a room. In each space, you can set music and announcement volumes separately, test the speakers, and set the volume limit. You can also enable or disable casting for the space.


Create a space

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces.

4

In the top right, click Add > Add new space.

  1. Enter a name for your space.

  2. Click Add.

Your new space appears on this site's Spaces tab.


Manage your Spaces

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces > your space.

4

On the left side, you will see two volume sliders.

  • Adjust the music volume. This affects Soundtrack, Spotify, and line-input volume in your space.

  • Adjust the announcement volume. This will adjust the volume of announcements triggered through Command.

5

(Optional) Adjust the volume trim for the outputs in your space by clicking the trim buttons next to each output. This adjusts output volumes in your space relative to each other.

6

(Optional) Set a maximum volume for your space by clicking the Volume Limit button on the left side.

Individual outputs in your space can be configured for left, right, or mixed audio.

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces > your space.

4

Next to each output, click the Channel Mode dropdown to set the channel mode.


Identify an output

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces > your space.

4

Next to each output you wish to identify, click the button to announce the name of the output to the specified device or channel.

5

(Optional) To identify all outputs in your space at once, click the Test All Outputs button on the far left.

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces > your space.

4

On the left, toggle the Allow Casting option to enable or disable casting.

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces > your space.

4

On the left, click the Announce button.

This takes you to the Announcement page, with the space pre-targeted.

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces > your space.

4

On the left, click Pair Cameras.

5

Select the cameras you need to pair, then click Done.

1

In Verkada Command, go to All Products > Speakers.

2

On the left navigation, select Sites.

  1. Select your site.

  2. On the right, click Go to Site.

3

At the top, click Spaces > your space.

4

In the top right, click .

  1. Next to Delete space, click Delete.

  2. Enter the on-screen code, then click Delete to confirm.

Last updated

Was this helpful?