> For the complete documentation index, see [llms.txt](https://help.verkada.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.verkada.com/intercom/ko/configuration/set-up-and-configure-tenants.md).

# 테넌트 설정 및 구성

테넌트를 생성하고 라이선스를 사용하는 방식을 이해하기

Verkada Command에서 입주자를 생성하여 Verkada Intercom에 추가하면 방문자가 디렉터리에서 해당 입주자에게 전화할 수 있습니다. 입주자는 스위트나 사업장처럼 건물이나 공간의 일부를 점유하는 사람입니다. 인터콤에서 입주자는 디렉터리의 한 줄, 즉 방문자가 그 입주자에게 전화하고 건물에 들어가기 위해 누르는 버튼입니다.

입주자는 어떤 특정 인터콤과도 별개로 독립적으로 존재합니다. 통화 흐름을 다시 만들지 않고도 한 사이트에서든 여러 사이트에 걸쳐서든 동일한 입주자를 여러 인터콤에 재사용할 수 있습니다.

{% hint style="warning" %}
입주자는 멀티테넌트 모드가 켜져 있을 때 Verkada TS12-N-R2B, TD63, TK74에만 적용됩니다.
{% endhint %}

***

## 입주자 생성

{% hint style="warning" %}
입주자는 각 인터콤의 디렉터리가 아니라 입주자 페이지에서 생성됩니다.
{% endhint %}

{% stepper %}
{% step %}
**Verkada Command에서 모든 제품 > 인터콤 > 입주자로 이동합니다.**
{% endstep %}

{% step %}
**입주자 생성을 클릭합니다.**
{% endstep %}

{% step %}
**필수 정보를 입력합니다.**

* **입주자 이름**
* **사이트**—입주자를 하나 이상의 사이트에 추가할 수 있습니다. 각 사이트는 라이선스 1개를 사용합니다
  {% endstep %}

{% step %}
**(선택 사항) 추가 입주자 정보를 입력합니다.**

<table><thead><tr><th width="240.92578125">필드</th><th>설명</th></tr></thead><tbody><tr><td>로고</td><td>입주자를 나타내는 이미지입니다. TK74에만 표시됩니다.</td></tr><tr><td>표시 이름</td><td>TK74의 디렉터리에 표시되는 이름입니다.</td></tr><tr><td>호실</td><td>입주자의 호실 또는 스위트 번호입니다. 현재는 내부 참조용으로만 사용됩니다.</td></tr><tr><td>호출 코드</td><td>방문자가 TD63 또는 TK74에서 해당 입주자에게 전화를 걸 때 입력하는 코드입니다. 호출 코드는 <em>필수입니다</em> TD63에 입주자를 추가하려면 필요합니다.</td></tr><tr><td>시작일 및 종료일</td><td>입주자의 임대가 시작되고 종료되는 날짜입니다. 입력하면 이 날짜에 따라 입주자의 <em>상태가</em>자동으로 변경됩니다. (아래 행 참조)</td></tr><tr><td>상태</td><td>입주자가 활성인지 비활성인지 여부입니다. 활성 입주자만 라이선스를 사용하며 인터콤에서 호출할 수 있습니다. </td></tr><tr><td>메모</td><td>입주자에 대한 추가 정보입니다. 이 섹션에 포함된 정보는 다음의 맥락으로 사용할 수 있습니다. <a href="https://help.verkada.com/intercom/ko/configuration/ai.md">AI 음성 디렉터리</a>. </td></tr><tr><td>통화 흐름</td><td>각 입주자에는 단일 통화 흐름이 있으며, 이는 해당 입주자를 나열하는 모든 인터콤에 적용됩니다. 통화 흐름 구성 방법은 <a href="https://help.verkada.com/intercom/ko/configuration/add-and-configure-receivers-in-intercom/create-and-use-shared-call-flows.md">통화 흐름 생성</a> 을 참조하세요. </td></tr></tbody></table>
{% endstep %}

{% step %}
**저장을 클릭합니다.**
{% endstep %}
{% endstepper %}

***

## 인터콤에 입주자 추가

{% hint style="warning" %}
입주자는 인터콤과 동일한 사이트에 속해야 합니다.
{% endhint %}

{% hint style="info" %}
활성 입주자만 디렉터리에 표시되고 호출할 수 있습니다. 비활성 입주자는 활성화하기 전에 인터콤에 추가할 수 있습니다.
{% endhint %}

다음에서 입주자를 추가합니다. **입주자** 페이지 또는 인터콤 **수신자** 탭에서.

{% tabs %}
{% tab title="입주자 페이지" %}
{% stepper %}
{% step %}
**Verkada Command에서 모든 제품 > 인터콤 > 입주자로 이동합니다.**
{% endstep %}

{% step %}
**입주자를 선택하여 세부 정보 패널을 엽니다.**
{% endstep %}

{% step %}
**인터콤 아래에서 인터콤 편집을 클릭합니다.**
{% endstep %}

{% step %}
**이 입주자가 표시되어야 하는 인터콤을 선택합니다.**
{% endstep %}
{% endstepper %}
{% endtab %}

{% tab title="수신자 탭" %}
{% stepper %}
{% step %}
**Verkada Command에서 모든 제품 > 인터콤으로 이동합니다.**
{% endstep %}

{% step %}
**인터콤을 선택합니다.**
{% endstep %}

{% step %}
**수신자를 클릭합니다.**
{% endstep %}

{% step %}
**입주자 추가를 클릭합니다.**
{% endstep %}

{% step %}
**이 인터콤에 추가할 입주자를 선택합니다.**
{% endstep %}
{% endstepper %}
{% endtab %}
{% endtabs %}

***

## 입주자 라이선스 작동 방식

각 입주자는 사이트에 할당되어야 합니다. 입주자와 사이트의 각 조합은 LIC-ITT 라이선스 1개를 사용합니다. 같은 사이트의 여러 인터콤에 표시되는 입주자도 여전히 하나의 조합으로 계산됩니다.

* LIC-ITT 라이선스는 10개 입주자 단위로 판매됩니다.
* 비활성 입주자는 라이선스를 사용하지 않습니다.

#### 라이선스 예시 검토

* **스위트 100은** 두 사이트에 할당되어 있어 라이선스 2개를 사용합니다.
* **스위트 200은** 한 사이트에 할당되어 있어 라이선스 1개를 사용합니다.
* **스위트 300은** 같은 사이트의 두 인터콤에 표시됩니다. 이는 하나의 입주자-사이트 조합이므로 라이선스 1개를 사용합니다.

<table><thead><tr><th>입주자</th><th>할당된 사이트</th><th>인터콤</th><th data-type="number">사용된 라이선스</th></tr></thead><tbody><tr><td>스위트 100은</td><td>사이트 A</td><td>로비</td><td>1</td></tr><tr><td>스위트 100은</td><td>사이트 B</td><td>정문</td><td>1</td></tr><tr><td>스위트 200은</td><td>사이트 A</td><td>로비</td><td>1</td></tr><tr><td>스위트 300은</td><td>사이트 A</td><td>로비, 주차장</td><td>1</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.verkada.com/intercom/ko/configuration/set-up-and-configure-tenants.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
