> For the complete documentation index, see [llms.txt](https://help.verkada.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.verkada.com/government-solutions/ja/tosettoappu/government-solutionsnonettowku/required-access-control-network-settings-government-solutions.md).

# アクセスコントロールのネットワーク設定

この記事では、Verkadaの [アクセスコントローラー](https://docs.verkada.com/docs/access-controllers-series-overview.pdf) が通信するために必要な [Verkada Command](https://help.verkada.com/command/ja/hajimeni/get-started-with-verkada-command.md)のネットワーク設定について説明します。その他のVerkada製品ラインに必要なネットワーク設定については、 [必要なネットワーク設定](https://help.verkada.com/command/ja/herupugadesuka/required-network-settings.md).

{% hint style="warning" %}
Verkadaデバイスは、プロキシサーバーまたはSecure Socket Layer（SSL）/Transport Layer Security（TLS）の検査が必要なLANとは互換性がありません。いずれかを使用している場合、VerkadaデバイスがVerkada Commandと通信できるように、すべてのVerkadaデバイスをバイパスする設定が必要です。
{% endhint %}

## ステータスLED

物理アクセスコントローラーの左上にある青色の [ステータスLED](https://help.verkada.com/access-control/ja/toraburushtingu/verkada-ac41-status-led.md) が点滅している場合、アクセスコントローラーがCommandと通信できていないことを示しています。

このような動作が見られる場合：

* アクセスコントローラーのネットワークが正しく設定されていることを確認してください。
* 「 [Verkadaアクセスシステムのオフライン時の動作](https://help.verkada.com/access-control/ja/toraburushtingu/access-control-hardware-checks/verkada-access-offline-operation.md) 」を参照して、Commandと通信できない場合のアクセスシステムの動作を確認してください。

問題が解決しない場合は、 [Verkadaサポート](https://help.verkada.com/government-solutions/ja/hajimeni/contact-verkada-support-government-solutions.md).

## IPアドレス

アクセスコントローラーがローカルエリアネットワーク（LAN）上で、またインターネット経由でCommandと通信するには、IPv4アドレスが必要です。アクセスコントローラーは、Dynamic Host Configuration Protocol（DHCP）のUDPポート67および68を使用して、IPアドレスとネットワーク設定を取得します。

アクセスコントローラーに特定のIPアドレスを割り当てる場合は、アクセスコントローラーの [メディアアクセス制御（MAC）アドレス](https://help.verkada.com/access-control/ja/insutru/access-control-deployment-best-practices/find-a-serial-number-and-mac-address.md) （デバイスのラベルに記載）を使用して、DHCP予約を設定してください。

## ドメインネームシステム

アクセスコントローラーはDNSサーバーを使用して、Verkadaの完全修飾ドメイン名（FQDN）をIPアドレスに解決し、接続します。DHCPサーバーは、ネットワーク上のDNSサーバーの場所をアクセスコントローラーに通知します。アクセスコントローラーはUDPポート53を使用して通信します。

{% hint style="warning" %}
DNS over HTTPS（DoH）は現在サポートされていません。
{% endhint %}

## 電源

電源要件の詳細については、 [アクセスコントローラーのデータシート](https://www.verkada.com/docs/?product=accessControl\&contentType=datasheet).

## ファイアウォール設定

VerkadaのアクセスコントローラーがCommandと通信し、すべての機能を利用できるようにするには、多数のエンドポイントへのアクセスが必要です。多くのお客様は、アクセスコントローラーが一般的な必須エンドポイントと通信できるようにしたいと考える場合があります。

以下は、 **すべてのオーガナイゼーションのリージョンに適用される**:

| ドメイン/IP        | プロトコル/ポート             |
| -------------- | --------------------- |
| 34.216.15.26   | UDP:123               |
| 35.166.49.153  | UDP:123 + TCP/UDP:443 |
| \*.verkada.com | UDP:123 + TCP/UDP:443 |

より詳細な許可リストを使用する場合は、デバイスが配置されている地域に基づいて、IPアドレスと完全修飾ドメイン名（FQDN）の両方をファイアウォールルールに追加できます。

{% hint style="warning" %}
地域は、Commandで [オーガナイゼーションを作成](https://help.verkada.com/command/ja/hajimeni/get-started-with-verkada-command.md) するときに選択します。
{% endhint %}

### 地域：米国政府機関向け

**Verkadaの標準エンドポイント**

| ドメイン/IP                                                           | プロトコル/ポート   |
| ----------------------------------------------------------------- | ----------- |
| api.control.verkada.com                                           | TCP/UDP:443 |
| api.global-prod.control.verkada.com                               | TCP/UDP:443 |
| api-ga.control.verkada.com                                        | TCP/UDP:443 |
| firmware.control.verkada.com                                      | TCP/UDP:443 |
| update.control.verkada.com                                        | TCP/UDP:443 |
| vconductor.global-prod.command.verkada.com                        | TCP/UDP:443 |
| api.global-prod.control.verkada.com                               | HTTPS:443   |
| update.control.verkada.com                                        | HTTPS:443   |
| NTP: DHCPクライアントオプション42で返されます。指定されていない場合は、time.nist.govにフォールバックします | UDP:123     |
| ローカルストリーミング機能: LAN上の\*:4100                                       | HTTPS:443   |
| \*.kinesisvideo.us-gov-west-1.amazonaws.com                       | HTTPS:443   |
| s3.us-gov-west-1.amazonaws.com                                    | HTTPS:443   |
| verkada-firmware.s3.us-west-2.amazonaws.com                       | HTTPS:443   |
| \*.prod-govus-pine.control.verkadagov.com                         | HTTPS:443   |
| api.control.verkada.com                                           | HTTPS:443   |

**NTPエンドポイント**

| ドメイン/IP                  | プロトコル/ポート             |
| ------------------------ | --------------------- |
| 34.216.15.26             | UDP:123               |
| 35.166.49.153            | UDP:123 + TCP/UDP:443 |
| time.control.verkada.com | UDP:123               |
| time.cloudflare.com      | TCP:4460              |
| time.cloudflare.com      | UDP:123               |

**アクセスコントロールのエンドポイント**

| ドメイン/IP                                        | プロトコル/ポート   |
| ---------------------------------------------- | ----------- |
| access.control.verkada.com                     | TCP/UDP:443 |
| vcerberus.command.verkada.com                  | TCP/UDP:443 |
| \*.prod-govus-pine.control.verkadagov.com      | TCP/UDP:443 |
| vinnout.prod-govus-pine.command.verkadagov.com |             |

{% hint style="info" %}
以下を使用して [Verkada Network Tester](https://network-tester.support.verkada.com/) デバイスがVerkada Commandに接続できることを確認します。地域と **アクセス** 製品タイプを選択して、チェックを実行します。

テストを実行するには、次のエンドポイントをネットワークで許可する必要があります。

* speed.cloudflare.com
* network-tester.support.verkada.com
  {% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.verkada.com/government-solutions/ja/tosettoappu/government-solutionsnonettowku/required-access-control-network-settings-government-solutions.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
