Skip to main content
All CollectionsConnectivityConfiguration and Setup
Setup Dynamic DNS for Cellular Gateways
Setup Dynamic DNS for Cellular Gateways

Learn how to configure Dynamic DNS on a Verkada Cellular Gateway

Updated over a week ago

Cellular gateways can act as a site-to-site IPsec IKEv2 VPN client. The public IP address for a VPN client is required to set up the IPsec tunnel. Setting up Dynamic DNS will allow the VPN server to always have access to the dynamically assigned public IP for the VPN client (GC31/GC31-E).

Configure Dynamic DNS on a cellular gateway

  1. In Verkada Command, go to All Products > Gateways .

  2. Select the gateway you want to configure.

  3. In the top right, click Settings .

  4. Under Network > Dynamic DNS toggle on Enable.

  5. Select the service for your Dynamic DNS.

  6. (Optional) Enter the Hostname, Username, Password, and Server.

  7. Hit Apply, then Confirm to save your changes.


Need more help? Contact Verkada Support.

Did this answer your question?