This article outlines the required network settings that your Verkada Alarms devices need to communicate with Verkada Command. For more information on the required network settings for other Verkada product lines see Required Network Settings.
Note: Verkada devices are incompatible with LANs that require proxy servers or Secure Socket Layer (SSL)/Transport Layer Security (TLS) inspection. If either is in use, a bypass for all Verkada devices must be implemented for Verkada devices to communicate with Verkada Command.
IP address
Alarms devices must be assigned an IPv4 address to communicate on the LAN and to Verkada Command. Alarms devices use Dynamic Host Configuration Protocol (DHCP) and User Datagram Protocol (UDP) to obtain their IP addresses and network configurations.
If you require your Alarms device to have a specific IP address, create a DHCP reservation using the device’s Media Access Control (MAC) address (found on the device's label).
Domain Name System
Alarms devices use the DNS server to resolve Verkada’s fully qualified domain names (FQDN) to IP addresses to communicate with them. Your DHCP server tells the Alarms device where the DNS server is on the network and the Alarms device communicates using UDP port 53.
Note: DNS over HTTPS (DoH) is currently not supported.
Power
Some Alarms devices are powered through Power over Ethernet (PoE). This means the network switch needs to provide power to them, or a PoE injector needs to be utilized. For specifics on power requirements, see the Alarms device's datasheet.
Firewall settings
Alarms devices require access to many endpoints to ensure they can communicate with Command and all features will be accessible. Many customers may want to allow the devices to communicate with the general required endpoints.
These are the general domains to allow, applicable for all organization-regions:
34.216.15.26 - UDP/123
*.verkada.com - UDP/123 + TCP+UDP/443
*.appcenter.ms - TCP/443
global.turn.twilio.com - TCP/443
If your firewall does not allow wildcard masking, or you prefer to have the entire FQDN of the endpoint in your firewall rules, you can add the domains to your allowlist based on the region your devices are in.
Note: Your region is selected when you create an organization in Command.
Region: United States
34.216.15.26 - UDP/123
alarms.control.verkada.com - TCP+UDP/443
alarms.global-prod.control.verkada.com - TCP+UDP/443
api.control.verkada.com - TCP+UDP/443
api.global-prod.control.verkada.com - TCP+UDP/443
device-nlb.verkada.com - TCP+UDP/443
firmware.control.verkada.com - TCP+UDP/443
index.control.verkada.com - TCP+UDP/443
nlb.verkada.com - TCP+UDP/443
relay.control.verkada.com - TCP+UDP/443
relay.global-prod.control.verkada.com - TCP+UDP/443
time.control.verkada.com - UDP/123
update.control.verkada.com - TCP+UDP/443
valarm.command.verkada.com - TCP+UDP/443
valarm.global-prod.command.verkada.com - TCP+UDP/443
vconductor.command.verkada.com - TCP+UDP/443
vconductor.global-prod.command.verkada.com - TCP+UDP/443
*.appcenter.ms - TCP/443
global.turn.twilio.com - TCP/443
Region: Europe
alarms.global-prod.control.verkada.com - TCP+UDP/443
alarms.prod2.control.verkada.com - TCP+UDP/443
api.prod2.control.verkada.com - TCP+UDP/443
api.global-prod.control.verkada.com - TCP+UDP/443
index.prod2.control.verkada.com - TCP+UDP/443
relay.global-prod.control.verkada.com - TCP+UDP/443
relay.prod2.control.verkada.com - TCP+UDP/443
time.control.verkada.com - UDP/123
update.control.verkada.com - TCP+UDP/443
valarm.global-prod.command.verkada.com - TCP+UDP/443
valarm.prod2.command.verkada.com - TCP+UDP/443
vbroadcast.command.verkada.com - TCP+UDP/443
vbroadcast.prod2.control.verkada.com - TCP+UDP/443
vconductor.global-prod.command.verkada.com - TCP+UDP/443
vconductor.prod2.command.verkada.com - TCP+UDP/443
All regions
BC51s in all regions require these endpoints:
*.apple.com - TCP/80
*.apple.com - TCP/443
*.apple.com - TCP/2197
*.apple.com - TCP/5223
*.apple.com - UDP/123
crl.entrust.net - TCP/80
crl3.digicert.com - TCP/80
crl4.digicert.com - TCP/80
global.stun.twilio.com - UDP/3478
global.turn.twilio.com - UDP/3478
*.mzstatic.com - TCP/80
*.mzstatic.com - TCP/443
ocsp.digicert.com - TCP/80
ocsp.entrust.net - TCP/80
vmdm.command.verkada.com - TCP+UDP/443
vmdm.global-prod.command.verkada.com - TCP+UDP/443
BZ11s in all regions require these endpoints:
global.stun.twilio.com - UDP/3478
global.turn.twilio.com - UDP/3478
Need more help? Contact Verkada Support.