# Prepare for a Command Connector Deployment

## Prerequisites and planning

* **Are the cameras IP-based?**
  * Analog cameras require an encoder to function (not recommended).
* **Are cameras on the** [Hardware Compatibility List](https://www.verkada.com/security-cameras/command-connector/hcl)?
  * If not, verify they support ONVIF Profile S or RTSP.
  * Use the [ONVIF Conformant Products](https://www.onvif.org/conformant-products/) tool to verify compatibility.
* **Do you have complete camera specifications?**
  * Camera type and model
  * Megapixel resolution
  * Encoding format
  * Number of video feeds
  * IP address and login credentials
* **Where are the cameras connected?**
  * Ideally, they should connect to the same network switch as the Command Connector.

***

## Device requirements

### Camera capabilities

* **Encoding format**: Only H.264 streams are supported.
* **Resolution**:
  * **≤ 5MP**: Recommended for optimal performance.
  * **8MP** = Supported, but reduces the number of cameras that can be connected per Command Connector.
  * **> 8MP** = May not be supported. Contact your Verkada Solutions Engineer for more information.
* **Multisensor cameras**: Require one license per video stream.
* **Login access**: Each camera must have a known IP address and admin credentials.

### Network setup

* Cameras must be on the same LAN as the Command Connector.
* Avoid configurations where cameras are only accessible through an NVR’s internal switch.
* IT resources:
  * [Network Requirements](https://help.verkada.com/command-connector/command-connector-network-settings)
  * [Local Streaming](https://app.gitbook.com/s/ylYKicREo6JpuOJH4teK/live-streaming/local-streaming-on-verkada-cameras)

***

## Sizing and licensing

Collaborate with your Verkada Partner or Sales Rep to determine:

* The number of Command Connectors required.
* Whether camera retention settings align with expected video usage and storage needs.

{% hint style="warning" %}
One **LIC-CAM** license is required per video stream.
{% endhint %}

***

## Physical installation

Each Command Connector is a 1RU rack-mount server and requires:

* AC power
* One network connection to the site switch
* (Optional) Alternative mounting solutions are available from third-party suppliers.

Reference: [Command Connector Install Guide (PDF)](https://docs.verkada.com/docs/Verkada-CC300-500-700-Command-Connector-Install-Guide.pdf).

{% hint style="success" %}
**Need more help?** Contact [Verkada Support](https://app.gitbook.com/s/NRq5qDDjsYNxwNzF1bcB/need-help/contact-verkada-support).
{% endhint %}
