> For the complete documentation index, see [llms.txt](https://help.verkada.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.verkada.com/command-connector/es/instalacion/replace-a-command-connector.md).

# Reemplazar un Command Connector

Mueva las unidades de almacenamiento de un Command Connector averiado a un reemplazo del mismo modelo para conservar el vídeo grabado

Use este procedimiento cuando un Command Connector haya fallado y haya disponible un reemplazo del mismo modelo.

{% hint style="danger" %}
Necesita permisos de administrador del sitio para los sitios donde se encuentran el Command Connector fallado y el Command Connector de reemplazo.
{% endhint %}

{% hint style="warning" %}
Si una unidad de almacenamiento ha fallado y el Command Connector sigue funcionando, [contacte con el equipo de soporte de Verkada](https://help.verkada.com/command/es/necesitas-ayuda/contact-verkada-support.md).
{% endhint %}

***

### Requisitos

* El Command Connector de reemplazo debe cumplir todo lo siguiente:
  * Mismo modelo que el Command Connector fallado
  * En línea
  * Firmware que admita el reemplazo del dispositivo
  * Sin canales conectados
* El Command Connector fallado debe cumplir todo lo siguiente:
  * &#x20;Debe tener al menos un canal conectado
  * Puede estar sin conexión o en línea
* Necesita acceso físico a ambos Command Connector.

***

### Reemplace el Command Connector

{% stepper %}
{% step %}
**En Verkada Command, vaya a Todos los productos > Dispositivos.**
{% endstep %}

{% step %}
**Seleccione el Command Connector que va a reemplazar.**
{% endstep %}

{% step %}
**Junto a Canales conectados, abra el menú y seleccione Iniciar sustitución del dispositivo.**

<figure><img src="https://3906114897-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNje42M0OzzbT2nhzkB3K%2Fuploads%2FPBOKu1PKWk2MNhg1Aprn%2FScreenshot%202026-11-03%20at%2012.17.48%E2%80%AFPM.png?alt=media&amp;token=a946124c-d124-4d01-ba70-77cb3a614106" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
**En Reemplace su Command Connector averiado, seleccione Iniciar.**
{% endstep %}

{% step %}
**Seleccione el Command Connector de reemplazo y, a continuación, seleccione Siguiente.**

Un Command Connector que no puede seleccionar muestra uno de estos estados:

* *Dispositivo sin conexión*
* *Modelo no coincide*
* *Firmware no compatible*
* *Tiene canales conectados*

<div align="left" data-with-frame="true"><figure><img src="https://3906114897-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNje42M0OzzbT2nhzkB3K%2Fuploads%2Fr2vFFPAYuezji3aU7vyw%2FScreenshot%202026-11-03%20at%2012.16.40%E2%80%AFPM.png?alt=media&amp;token=1513e131-9205-46bc-b89b-b2b102e8bcaa" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}
**Mantenga presionado el botón de encendido para apagar ambos Command Connector. Cuando ambos estén sin conexión, seleccione Se han apagado.**

<div align="left" data-with-frame="true"><figure><img src="https://3906114897-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNje42M0OzzbT2nhzkB3K%2Fuploads%2FgjlWVNv3XQPJRmBwGVsI%2Fimage.png?alt=media&amp;token=c3f0b57d-1196-49bd-b513-fb139f0e9498" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}
**Retire todas las unidades del Command Connector de reemplazo y, a continuación, seleccione Se han retirado todas las unidades.**

Presione el botón a la derecha de la franja azul, extraiga con cuidado el soporte y aparte esas unidades.

<div align="left" data-with-frame="true"><figure><img src="https://3906114897-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNje42M0OzzbT2nhzkB3K%2Fuploads%2F9m0Pz5VS8grXIzig5dWo%2Fimage.png?alt=media&amp;token=f307f6b1-b7b1-40bf-858d-6be496bb3b07" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}
**Mueva todas las unidades del Command Connector fallado a las ranuras correspondientes del de reemplazo y, a continuación, seleccione Todas las unidades están en las ranuras correspondientes.**

{% hint style="danger" %}
Mueva cada unidad del Command Connector fallado a la ranura correspondiente del de reemplazo. Deje la tapa del soporte abierta hasta que la unidad esté completamente colocada; luego cierre la tapa del soporte hasta que haga clic.
{% endhint %}

<div align="left" data-with-frame="true"><figure><img src="https://3906114897-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNje42M0OzzbT2nhzkB3K%2Fuploads%2F6FIqZUoW7D5vawKmCuyh%2Fimage.png?alt=media&amp;token=0dd74de4-dc02-4d3a-9967-47ad9d0fc10f" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}
**Encienda el Command Connector de reemplazo y deje apagado el Command Connector fallado. Cuando el de reemplazo esté en línea, seleccione Transferir canales.**

<div align="left" data-with-frame="true"><figure><img src="https://3906114897-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNje42M0OzzbT2nhzkB3K%2Fuploads%2FlLkg1XdAvrhKCAO7jCAu%2Fimage.png?alt=media&amp;token=eb6a1add-d6cc-4b69-9544-539ce833a368" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}
**Permanezca en esta página mientras Command muestra&#x20;*****Transferiendo canales*****.**

Esto puede tardar unos minutos.
{% endstep %}

{% step %}
**Cuando Command muestre&#x20;*****El nuevo dispositivo se configuró correctamente*****, seleccione Nuevo Command Connector.**

Los canales del Command Connector fallado ahora están en el de reemplazo.
{% endstep %}
{% endstepper %}

***

### Después de la transferencia

* El vídeo almacenado en las unidades que movió está disponible en el Command Connector de reemplazo.
* El Command Connector fallado ya no muestra esos canales.

{% hint style="warning" %}
El estado de la unidad puede tardar unos minutos en actualizarse. No puede agregar cámaras mientras se está realizando un reemplazo de dispositivo.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.verkada.com/command-connector/es/instalacion/replace-a-command-connector.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
