When you change a Verkada camera's location, you can expect the following:
It affects the camera's position on the map and its time zone.
The camera is removed from any floor plans where it is currently located.
Note: When you change a camera's location to certain jurisdictions, it may limit the people analytics features of the camera (for example, gender search, face detection, and person of interest).
Change a camera's location
Change a camera's location from the Settings page
In Verkada Command, go to All Products > Cameras.
Select the camera that you want to update.
At the right of the camera feed, click the Settings (gear) icon.
On the left panel, the General setting is selected by default.
Scroll down to Location and click Change.
Update the address, as needed.
When a map and search bar then appears, enter the address of the location in the field and select it from the dropdown menu.
Click Save.
Change a camera's location from the Devices page
In Verkada Command, go to All Products > Devices.
Select the camera that you want to update.
To the right of the camera details, select the Location field.
When the Change Location map appears, enter the address of the location in the field and select the address from the dropdown to confirm.
Click Save.
Bulk change a camera's location from the Devices page
In Verkada Command, go to All Products > Devices.
Check the box next to any camera you want to update the location.
At the top, click the Edit Settings (gear) icon.
On Edit Settings:
Related resources
Need more help? Contact Verkada Support