Access Station Pro Command Configuration

Configure the Access Station Pro (AF64) in Verkada Command.

Complete the steps below to add the Access Station Pro to your organization, set up a door, and manage door, video, and device settings after configuration.

You need Access Site Admin permissions to add and configure the Access Station Pro in Command.

---

Configuration

1

Add the AF64 to your Command organization.

See Add a Device for more information.

2

At the end of the setup process, select Configure.

3

Select how the door is configured.

Depending on the wiring architecture you chose during Access Station Pro Installation, select the appropriate door option below:

Door lock connected to AF64

The Access Station Pro will function as the access controller for the door. Select one of these options:

• Add new door:

  1. Click Select.
  2. Continue to step 4.

See Move Doors between Access Controllers for more information.

• Move existing door from another access controller to AF64

  1. Click Select.
  2. Select the door to move and click Next.
  3. (Optional) Configure Face Unlock and click Done.

You can only move doors within the same site.

Door lock connected to another Verkada Access Controller

The Access Station Pro will function as a reader for a door controlled by another Verkada access controller.

1. Select the door to move and click Next.
2. (Optional) Configure Face Unlock and click Done.

If you do not already have a door configured on the access controller, create and configure one first. See Add a Door to an Access Controller and Configure a Door in Command for detailed instructions.

The AF64 and the Verkada Access Controller must be assigned to the same site.

4

On General:

1. Add the Door Name and Building / Floor.
2. Configure the other settings as needed.
3. Click Next.

5

On Face Unlock:

1. (Optional) Toggle on Face Unlock.
2. Set Face Unlock Detection Distance (Near or Far) and Face Unlock Cooldown (interval in seconds).
3. Click Next.

See Face Unlock for more information.

6

On Installer Setup:

1. Configure options as needed.
2. Click Next.

7

On Access:

1. Search for and assign access levels to the door.
2. Click Done.

---

Access Station Pro device page

After configuration, you are taken to the Access Station Pro device page in Access Control. The AF64 device page consists of three high-level tabs: Door, Video, and Settings.

Door

After configuration, you are taken to the Events section of the Door tab. From here, you can view the camera feed from the associated context cameras as well as the AF64 itself. You can also monitor the door's current state and review all associated events. Under the Access and Schedule tabs, you can update the door's access levels and schedule, respectively.

Video

The Video tab for the AF64 provides access to features supported across all Verkada cameras. For more information, see Video Security.

Settings

The Settings page for the AF64 lets you view all device information and edit the door and video settings. For more information about door settings and video settings, see Configure a Door in Command and the Camera Settings.

Face Unlock

You can enable and configure Face Unlock while setting up a door for the Access Station Pro. Some settings differ from a standard door configuration. See Face Unlock for more information.