Assigning access card credentials to a user's profile allows them to use a physical card or fob to access the doors in your organization.
Assign card credentials
You can assign cards to users profiles individually or in bulk.
Individually
In Verkada Command, go to All Products > Access.
On the left navigation, click Access Users and Groups
.Under Users, select the user you want to add an access card to
At the top of the user's page, click Profile.
On the left, scroll down to Credentials > Badges.
Click the Add new card link to begin process for adding a card via scan or manual entry.
When the Credentials details expand, you can add a card in one of two ways:
Scan the card against a selected reader, as shown below
Enter card information
Scan a card
Select a door to scan and click Select.
Scan the card. If it doesn't scan, Retry; otherwise, contact Verkada Support.
In bulk
In Verkada Command, go to All Products > Access.
On the left navigation, click Access Users and Groups
. Check the box next to the users you want to add a card for.
At the top right menu bar, click Cards
and select Scan Cards.
Select the door with a reader you want to scan against.
Click Scan next to the user profile you want to add the card to. Once the scan is successful, you can move on to the next user.
Need more help? Contact Verkada Support